Professional Cameras

  The new and the only stabilizer under $100 for dslr’s and prosumer camcorders. Nikon, canon, sony, panasonic, olympus, pentax. Now you can get the same results as if you were using a $500.00 or $800.00 stabilizer. Easy to use, great for museums, botanical gardens, at the park, beach, etc.

Please note the pictured cameras are with our previous fat camera correction plate. Canon t2i with bower 14mm wide angle.

Canon t2i with tamron lens 17-50mm. The new slim camera correction plate let you increase the payload of your camera to get it in balance.

Canon t3i and rode mic, external light sample configurations. This new joint it’s extremely smooth and fluid. Better than ball joint (which has it’s limitations from side to side or forth to back). Some cameras has the tripod socket hole(mounting hole) in front center or on the back like dslr’s or on the left far from center. Select any hole on bottom of camera corrector to correct the center of gravity on your camera forth to back. Or just slide left-right or right to left. Slim camera correction plate to adjust left or right camera’s center of gravity with 1/4-20 camera screw. Convenient tripod bracket for easy balance.

Dimensions 11-1/4″ x 8-1/4 ” x 5. Stabilizer weights 1.38 lbs (625 grams). Slim camera correction plate weights 3.2oz (90 grams). Total weight including counter weighs, 2.90 lbs (2 lbs 15 oz) (1304 grams).

(16 0z - 49.6oz) (453 grams - 1406 grams). Are not included (for demo purposes only).

Perfect for of set cameras, (with mounting hole on the side). Never use camera strap, (common mistake cause undesired unbalance). ® 2 - 8 days. Priority mailâ® 2-3 days priority mailâ® medium flat rate box 2-3 days. Flat rate it’s more adequate for some costumers please review it before you pay, so you don’t get high rates. We cannot mark merchandise values below the value of the items or mark as “gifts”, usa and international government regulations prohibit this. (item must be returned in 100% working order, with no sings of abuse, misuse, scratch or break).

2 channels: clean and lead. Two gain control knobs: input gain and lead drive. Mid boost sound option: switchable via front panel button or via foot-switch. Channel switching via front panel button or via foot-switch. 1/4â stereo jack for connecting a z-4 foot-pedal: channel switching and mid boost. Line out: frequency compensated and balanced, featuring a speaker simulation. Power-amp output 8 ohms and 1x 16 ohms for several speaker options. 15 watts output power, 2x el84 power tubes. Build-in power soak (full power, 5 watts, 1 watt and speaker off).

 Made of aluminum (mostly anodized black), and abs. Gear drive can be mounted from either side. (reverse the gearbox upside-down, then put it back on).

Fit rail dia : 15 mm. Gears nylon and abs dial index adjustment : 360o. Clamp version compact follow focus x 1. Matching speed crank x 1. Matching lens gear belt x. 1 if you need extra, it will be $12 ea. Attach the follow focus correctly, pls see the pictures below.

   
 Excellent condition sqn 4s series ive portable mixer for sale. Works as new, all faders/pots/switches operate smoothly and with no crackles/hiss. This was my backup mixer so is in very nice condition but there are some signs of wear. Comes with its original leather case.
Any questions - ask away.

   

Rj pro matte box for 15mm rod support system. Swing away & lock-in design matte box, ideal for quick lens changing. Adjustable “eyebrow” styled side flags.

Two 360â° rotatable filter trays and apdators for polarizing filter. Filter trays are switchable for 4″x4″ and 4″x5.6″ filter size. Industry standard height with +/- 10mm adjustment. Four different sizes neoprene donut rings (openings diameter in 51mm, 64mm, 76mm and 102mm). Suitable for industry standard 15mm rail rod system.

Euro countries (except italy and russia). Italy, russian, south america & africa countries. If you have any question, please feel free to contact me.

 2 tannoy 12 dual concentric 3149 / 3169 loudspeakers & crossovers ex cheviots very good condition. Their roll surrounds have been professionally replaced.

Featuring the excellent pepperpot tweeters as previously used in the hpd series tannoys. As found in the little red monitor, little gold monitor, super red monitor etc. These are complete with everything that was carefully removed from a tatty pair of cheviot monitors.

These sought-after monitor units are a true elizabethan product! Classic british hifi from the golden era circa 1978.

They have high sensitivity and yet are rated up to 100 watts! These gold units are in very good condition and they sound simply superb! Phase linear single source dual concentric units. Sensitivity: 90db for 1 watt at 1 metre.

Amplifier power output [rms]: from 10w to 200w. Condition: these tannoy units are in very good condition.

They have been professionally fitted with new roll surrounds. The paintwork on the units’ chassis is beautiful. There are no scratches, stains or dents. The cones are intact, perfectly original and perform beautifully. They were removed from a pair of tatty cheviot cabinets which had woodworm starting!

Tannoy On Sale
Wireless speakers give you the freedom to move your music to where you want it to be without the hassles of cables. Planning to have a party outside? Don’t move your whole entertainment system outside while you can make use of outdoor wireless speakers which can move right along with the party. Want to have hi-fi quality sound through your laptop computer? Why should you be tied to wires while using a portable computer? Make use of wireless speakers to give you the freedom to work or play on…

 Micro gps module for arduino pic avr. Serial output nmea - 0183. Micro gps module - only 16×16x6 mm.

Brand new stock - not redundant or obsolete. Volume supply possible - please send us a message. The micro gps module has the following features. Note that it has an onboard antenna - no need to connect a separate antenna.

The breakout board allows easy access to all the module’s pins, and you only have to solder the small pitch module connecions once to attach to the breakout board. This gives a much more stable system, for reliable embedded system development. The board additionally features the connections (with components included) to make a simple zener regulator for supplying the required voltage (3.3v) to the vbackup pin if you are powering the module from 5v. Without the correct voltage to this pin, the module will not operate. If you are powering the module from 3.3v, you can simply connect vbackup to vcc. Decoupling capacitors for vbackup and vcc are also included. This module has a customised firmware specially for embedded developers. The module operates at 4,800 bps rather than the 9,600 bps stated in the datasheet. (advanced users - not needed to get gps data out). ¢ mediatek mt3329 single chip.

¢ dimension: 16mm x 16mm x 6mm. ¢ patch antenna size: 15mm x 15mm x 4mm. ¢ high sensitivity: up to -165 dbm tracking, superior urban performances. ¢ low shut-down power consumption: 15ua, typical. ¢ dgps(waas/egnos/msas/gagan) support (default: enable).

Update rate: up to 10hz (configurable). ¢ dual interface: uart ttl or usb.

¢ fcc e911 compliance and agps support (offline mode : epo valid up to 14 days). ¢ 3.3v or 5v power supply.

This is what you will receive. Item is posted 2nd class within uk, or optionally 1st class.

Breakout board dimensions:26 x 34 mm.

New dslr follow focus+shoulder mount rig+matte box slr camera dv vcr movie kit. Completely gear driven design for slip-free and accurate movement. Gear drive can be mounted from either side (works for both right-handed and left-handed).

Mounts onto 15 mm rod support (60mm center to center difference). Compatible with all dslr cameras, dv. Compatible with industry standard 15 mm rods. Fit rail distance : 60 mm.

Rails c-to-c distancet : 60mm. Rail rod/hand grip set wt. Dimension: 10.03 x 6.69 x 4.57in(l x h x w)min.

Flexible designed, easily adjust into different shooting mode. Can be mounted with follow focus for precise focus control 11. Handgrips and shoulder with pad provide comfort long period shooting. Made of durable anodized black metal and abs. 1.100% new and high quality. This matte box could be adjusted the height according to the lens of camera on the rail rod system.
Top and side flags are all easily removable. Rail hole diameter: 0.59 inch/15 mm.
Rails c-to-c distance: 2.36 inch/60mm. Big blade diameter:9.29 x 4.37 inch/23.6 x 11.1cm (l x w). Small blade diameter:9.29 x 4.37 inch/23.6 x 11.1cm (l x w). Packing size:10.04 x 6.93 x 2.52 inch/25.5 x 17.6 x 6.4(l x w x h). 1 x rail rod system for follow focus brackets.

For panasonic ag-hmc153mc gh-1 gh-2 gf-1 gf-2… For sony dsr-pd198p nex-3 nex-5… For any other dslr cameras and camcorders vcr dslr rig. The camera and lens in above picture are not included.


If you need return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Then get a unique address for return. Or your return won’t be accepted.

You brought wrong model or wrong color. We only accept the return for original package. Please make sure the item have no man-made sabotage.

If you are dissatisfied for any reason, please donot be quick to leave negative/neutral feedback. We work hard to make sure every customer 100% satisfied and resolve any problem for you and always leave positive feedback to all our customers.